首頁 > 標準大全 > ASTM B117-2016標準詳情

ASTM B117-2016

（該標準已經被ASTM B117-19替代）

　　本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用。我們?cè)敢夂湍涣鰽STM B117-2016標準細節信息或ASTM B117-2016測試方法，歡迎致電【18566398802】

ASTM B117-2016標準介紹

1. Scope

1.1 This practice covers the apparatus, procedure, and conditions required to create and maintain the salt spray (fog) test environment. Suitable apparatus which may be used is described in Appendix X1.

1.2 This practice does not prescribe the type of test specimen or exposure periods to be used for a specific product, nor the interpretation to be given to the results.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

ASTM Standards

B368 Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

D609 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

D1193 Specification for Reagent Water

D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

E70 Test Method for pH of Aqueous Solutions With the Glass Electrode

E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

G85 Practice for Modified Salt Spray (Fog) Testing

Q-Fog CRH鹽霧試驗箱用于ASTM B117-2016測試的步驟及設置

Q-fog CRH 循環鹽霧腐蝕試驗箱，擁有行業內先進的RH控制功能，擁有0~100%的濕度調節功能

溫馨提醒：本ASTM B117-2016可能存在更新的版本，建議尋找ASTM B117-2016的發行商確認。

符合 ASTM B117-2016 標準的
老化試驗箱

鹽霧腐蝕試驗機
Q-FOG CCT1100鹽霧腐蝕試驗機具有1103升大容量測試能力，可在一臺機器中實現高濕度、干燥、靜止、加熱等多個不同的循環測試條件。
Q-FOG CCT1100 馬上詢價
鹽霧試驗箱
Q-FOG CRH1100是一款的具有相對濕度控制功能和溶液噴淋功能的鹽霧試驗箱.
Q-FOG CRH1100 馬上詢價
鹽霧試驗箱
Q-FOG CRH600比起SSP/CCT鹽霧試驗箱增加了一個可調濕度控制功能，這意味著CRH鹽霧試驗箱具備更廣泛的標準適用范圍。
Q-FOG CRH600 馬上詢價
鹽霧腐蝕試驗箱
Q-LAB CCT600鹽霧腐蝕試驗箱不僅具備了SSP 鹽霧試驗箱的所有優點，同時還增加100%濕度功能。CCT600測試樣品容量為640升
Q-FOG CCT600 馬上詢價

近期文章